Search Further
kindly select atleast one option
Search Results for :
Products
Blogs and Related Content
Testimonials
Other Pages
CEAT Specialty 18.00-25 Tire Size in USA
-
PORT XL PLUS
PORT XL PLUS
- Longer service life on concrete surface
- Resistant to puncture
- Higher load carrying capacity
-
PORT PRO TX
PORT PRO TX
- Superior penetration resistance
- High load carrying capacity
- Resistant to cut & snags
-
PORT PRO SS
PORT PRO SS
- Superior mileage and durability
- Improved stability
- Resistant to cuts & snags
-
PORT PRO SL
PORT PRO SL
- Good traction on paved surfaces
- Improved penetration & heat resistance
- Resistant to wear & damage
-
PORT PRO RX
PORT PRO RX
- Resistance to cut & puncture
- High load carrying capacity
- Minimised bead failure
-
GRIP MASTER ND
GRIP MASTER ND
- For heavy load and extreme conditions
- Withstands cuts, snags and bruises
- High load carrying capacity & better durability
-
GM XL
GM XL
- High mileage and ideal for heavy duty application
- Resist to cuts and snags with optimised wear
-
GM XL
GM XL
- High mileage and ideal for heavy duty application
- Resist to cuts and snags with optimised wear
CEAT Specialty 18.00-25 tires are engineered for demanding port and industrial operations across the U.S. These tires deliver exceptional ground contact and traction on hard surfaces. They are ideal for high-load, high-cycle environments. These ensure durability and reliability under intense operating conditions. Built with bias construction, this tire is a trusted choice for port equipment requiring stability, strength, and long-term performance.
Key Features: CEAT Specialty 18.00-25 Tire Size in USA
- Flat tread with larger width: Maximizes ground contact for improved traction and stability on hard surfaces, ideal for port and industrial operations.
- Specially formulated tread compound: Extra-deep tread enhances heat resistance and penetration protection, extending performance life under heavy-duty conditions.
- Reinforced sidewall construction: Strengthens the tire’s structure for better impact resistance and longer service life in high-load environments.
Advantages: CEAT Specialty 18.00-25 Tire Size in USA
- High ground contact area: The flat, wide tread design ensures maximum surface contact, delivering excellent traction and stability on paved port surfaces.
- Improved penetration and heat resistance: A specially formulated, extra-deep tread compound enhances durability under high-load, high-temperature conditions—ideal for continuous port operation.
- Resistance to wear and damage: Reinforced sidewalls and robust bias construction protect against impact, abrasion, and premature wear, extending service life in demanding environments.
Boost operational efficiency with CEAT Specialty 18.00-25 tires—built for high-performance and compatible with leading equipment from John Deere, Case IH, Massey Ferguson, and New Holland.
Top-Selling Ceat Specialty Tire Sizes
-
YIELDMAX
YIELDMAX
- Stubble Resistance
- Higher Traction & Better Stability
- Enhanced Roadability & Loadability
-
FLOATMAX FT
FLOATMAX FT
- Better traction and grip
- Low vibration and larger footprint
- Reduced soil disturbance
Explore Tires by Equipment
Get in Touch with CEAT Specialty
Have Questions Related to CEAT Specialty Tires?
FAQs
The CEAT Specialty 18.00-25 tire is designed to be mounted on a 13-inch rim, which ensures optimal fitment, structural integrity, and performance. Using the recommended rim size helps maintain proper sidewall shape, load distribution, and traction. This is especially critical for heavy-duty port and industrial applications. Mounting the tire on the correct rim also supports even wear and maximizes service life under high-load, low-speed conditions.
The CEAT Specialty 18.00-25 tire is engineered with precise dimensions to ensure optimal performance in port and industrial environments:
- Section Width (SW): 498 mm (19.6 in): This measurement reflects the tire’s width from sidewall to sidewall when properly inflated. A wider section width increases surface contact, improving traction and load distribution on paved surfaces.
- Overall Diameter (OD): 1673 mm (65.9 in): The total height of the tire from the ground to the top of the tread. A larger diameter supports higher load capacity and contributes to smoother rolling over uneven surfaces.
- Static Loaded Radius (SLR): 768 mm (30 in): The distance from the wheel center to the ground when the tire is under load. This affects vehicle clearance and stability, especially important for heavy-duty port equipment.
- Rolling Circumference (RC): 4952 mm (195 in): The linear distance the tire covers in one full rotation. This dimension is critical for speed calibration, fuel efficiency, and synchronized movement in multi-axle systems.
These dimensions are optimized for high-load, low-speed operations, ensuring durability, stability, and consistent performance in demanding port conditions.
The CEAT Specialty 18.00-25 tire features a 40 Ply Rating (PR), indicating its robust multi-layered construction designed to handle heavy loads and resist punctures in demanding port and industrial environments.
Its Bias construction (IND-5) means the tire is built with crisscrossed layers of fabric cords, offering enhanced sidewall strength and durability—ideal for low-speed, high-load operations where stability and impact resistance are critical. The IND-5 classification further confirms its suitability for severe industrial service, including container handlers and port trailers.
Additionally, this tire is Tubeless (TL), eliminating the need for an inner tube. This design reduces maintenance, improves heat dissipation, and lowers the risk of sudden air loss, contributing to safer and more efficient performance in high-cycle applications.
For standard operation, the CEAT Specialty 18.00-25 tire should be inflated to 2.5 bar (36 psi). This pressure level is optimized to balance load-carrying capacity, traction, and tread wear in port and industrial environments. Maintaining the correct inflation pressure ensures consistent ground contact, minimizes heat buildup, and reduces the risk of premature tire damage. Always refer to your equipment manufacturer’s guidelines and operating conditions to confirm the ideal pressure for your specific use case.
At static position: 30600 kg (67,400 lbs)
At 1 km/h: 27200 kg (59,910 lbs)
At 5 km/h: 24650 kg (54,300 lbs)
At 10 km/h: 22950 kg (50,550 lbs)
At 25 km/h: 21250 kg (46,810 lbs)
Designed for port and industrial use, especially for equipment operating on paved surfaces under heavy loads and low speeds.
Consult your OEM or a certified tire expert. They’ll assess your machine’s specs and operating conditions to ensure the tire aligns with performance and safety requirements.